Extension Cable for Water Leak Detection Sensor
Replace / extend your water leak detection with 6m cable
- Early warning against water damage
- Alerts when water contacts any point on cable
- 6m cable length expandable to 30m
- Easily integrates with BMS & NMS
Protecting server rooms and other critical sites against the potentially devastating effects of water leakage and flooding.
The 6m reusable leak detection cable can be daisy-chained together up to 30m, allowing for thorough coverage of large areas. The sensor is triggered whenever water comes into contact with the yellow cable at any point along its length, triggering the binary sensor status from DRY to WET.
Often water leakage is not detected until flooding is extensive because of the fact that sites like server rooms are often equipped with raised flooring. ServersCheck's cable-type sensor can be layed out of sight, offering 24/7 alerting for the earliest signs of moisture.
|Technical Specifications - Water Leak Sensor|
|Operating temperature range: 0°C to +75°C in PoE mode|
|Operating humidity range: < 90% rH (non-condensating)|
|RJ45 cable gland protection rating: IP 68|
|Water Leak Cable (TraceTek): 6m cable to detect water on floors (ENV-WLEAK-6M).|
|Cable can be extended to 30m|
|Cable has to be put on the floor (under raised floor) or under pipes when monitoring water leaks from pipes.|
|Provides a WET/DRY indication in SensorGateway|
|Unit Of Measure||ea|
Be The First To Review This Product!
Help other Duons MCO Pty Ltd users shop smarter by writing reviews for products you have purchased.