Fuel Leak Detection Sensor

Detecting hazardous fuel leaks before problems arise

SKU: ENV-FLEAK-COMBO

$1,599.75
Sold Out

Quick Overview

  • Detects commonly used fuels
  • Rated for hazardous environments
  • 6m cable length expandable to 30m
  • Alerts via em, SMS & SNMP




Free Shipping Australia-wide! - $0.00
We offer FREE shipping standard Australia-wide on all orders.

Our fuel leak sensor detects 6 commonly used fuel types, providing early warning of potentially dangerous leaks.

 

ServersCheck offers a low cost sensor for 24x7 monitoring of fuel leaks from fuel tanks and generators. 


 

The IP, Modbus & SNMP based fuel leak cable can detected following fuel types:
 

Fuel Type Typical response time at 20°C
#1 diesel fuel 60 minutes
#2 diesel fuel 120 minutes
Gasoline 12 minutes
JP5 jet fuel 70 minutes
JP8 jet fuel 50 minutes
Jet-A fuel 50 minutes

 

The default cable length is 6m and can be extended to 30 m. The fuel leak sensing cable is designed for single use only. 

The fuel leak sensing cable may be used in Class I, Division 2, Groups A, B, C, D Hazardous Locations. If wiring from the module complies with relevant intrinsic safety requirements,  the sensing cable may be used in Class I, Division 1, Groups A, B, C, D Hazardous Locations (Zone 0 or Zone 1 in Europe). 

The fuel leak cable has following certifications:

When connected to the SensorGateway the sensor can generate alerts via email, SMS and SNMP traps.

(ENV-FLEAK-COMBO)

Technical Specifications -  Fuel Leak Detection Sensor

Fuel sensor small

Operating temperature range: 0°C to +75°C in PoE mode
Operating humidity range: < 90% rH (non-condensating)
Sensor Housing Dimensions: 65 mm x 95 mm x 55 mm
Sensor Housing Material: IP 65 plastic housing
Sensor Housing Colour: light grey
RJ45 cable gland protection rating: IP 68
Fuel Leak Detection Cable: 6m (single use only)
New Product or Feature Cable can be extended to 30m
Cable cannot be reused after detection and should be replaced
Provides a WET/DRY indication in SensorGateway
Sensor connects to & is managed by the SensorGateway. Requires the latest generation of SensorGateway (v5.1)
Communication protocols to probe through SensorGateway: SNMPv2,v3 XML HTTP and Modbus TCP
Connects via regular straight RJ45 cable to the SensorGateway
Maximum distance between probe and SensorGateway is 10m
SKU ENV-FLEAK-COMBO
Shipping Weight 0.5120kg
Shipping Width 0.200m
Shipping Height 0.110m
Shipping Length 0.200m
Shipping Cubic 1.000000m3
Unit Of Measure ea

Be The First To Review This Product!

Help other Duons MCO Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category