SensorGateway Firmware Download Step 2/2 (v_m1)

You have selected hardware version m1 of the SensorGateway. Click on the button below to download the firmware. 

Please note that a firmware will only work for the hardware version it was designed for. Loading it onto a different hardware version may damage your SensorGateway. 

To update the firmware, click on the Firmware Update option in the web interface of the SensorGateway.
All settings will be erased for devices with firmware 3.04 or lower. 

Before upgrading please carefully read the firmware release notes.
Should the firmware update fail, then try resetting it to factory default firmware by following the RESET instructions in the user manual

Download Mobile Firmware v5.20

If you were running firmware 3.06 on the Sensor Gateway then please consider following: if the internal sensor is not shown after upgrading to 3.30 then push the RESET button for 5 seconds WHILE the device is operating, then turn the SensorGateway off and on again. This should fix the issue.