Water Leak Detection Sensor + 6m Cable
Safeguarding infrastructure against leaks and flooding
- Early warning against water damage
- Alerts when water contacts any point on cable
- 6m cable length expandable to 30m
- Easily integrates with BMS & NMS
Protecting server rooms and other critical sites against the potentially devastating effects of water leakage and flooding.
The 6m reusable leak detection cable can be daisy-chained together up to 30m, allowing for thorough coverage of large areas. The sensor is triggered whenever water comes into contact with the yellow cable at any point along its length, triggering the binary sensor status from DRY to WET.
Often water leakage is not detected until flooding is extensive because of the fact that sites like server rooms are often equipped with raised flooring. ServersCheck's cable-type sensor can be layed out of sight, offering 24/7 alerting for the earliest signs of moisture.
The sensor can also monitor for leaks along pipelines such as humidification pipes, water cooling systems and condensation pipes. The cable can be run along the underside of the piping.
When connected to the SensorGateway, the sensor can alerts via email, SMS, voice and SNMP Traps. Integration with building management systems (BMS) and/or network monitoring systems (NMS) is easily acieved (simultaneously if desired) via the Modbus TCP and SNMP protocols.
|Technical Specifications - Water Leak Sensor|
|Operating temperature range: 0°C to +75°C in PoE mode|
|Operating humidity range: < 90% rH (non-condensating)|
|Sensor Housing Dimensions: 65 mm x 95 mm x 55 mm|
|Sensor Housing Material: IP 65 plastic housing|
|Sensor Housing Colour: light grey|
|RJ45 cable gland protection rating: IP 68|
|Water Leak Cable (TraceTek): 6m cable to detect water on floors (ENV-WLEAK-6M).|
|Cable can be extended to 30m|
|Cable has to be put on the floor (under raised floor) or under pipes when monitoring water leaks from pipes.|
|Provides a WET/DRY indication in SensorGateway|
|Sensor connects to & is managed by the SensorGateway. Requires the latest generation of SensorGateway (v5.1)|
|Communication protocols to probe through SensorGateway: SNMPv2,v3 XML HTTP and Modbus TCP|
|Connects via regular straight RJ45 cable to the SensorGateway|
|Maximum distance between probe and SensorGateway is 10m|
|Unit Of Measure||ea|
Be The First To Review This Product!
Help other Duons MCO Pty Ltd users shop smarter by writing reviews for products you have purchased.